Showing posts with label Triumph Gloria Vitesse. Show all posts
Showing posts with label Triumph Gloria Vitesse. Show all posts

Triumph Gloria Vitesse Cont'd

 


Along with other items for paint, here is one of the bonnet landing panels refreshed.












Below we have the beginnings of a batch of trim fitting T bolts. They will each be cut from the row the heads are machined near flush and then slide into position on a painted brass hollow trim strip and fitted along the bonnet.
The previous ferrous items had corroded away and so these are non ferrous.




Odds and ends of metal strips refreshed for fitting, it is hard to see but they are dark blue and black where required.
This dark blue must always have a black undercoat / primer too.





Triumph Gloria Vitesse work through late summer and ongoing.... more to follow.




Above, bumper parts fettle and prepare.


Below: Chrome fettle and dress after plating to remove flash with a needle 
diamond file and Arkansas oilstone









We used her for Jacob and Millie's wedding (even though the fuel pump stopped), hence the discarded wedding veil and flowers on the side. 
As the wedding took place in their home venue, it was still part of the day in the beautiful Jurassic coast backdrop. The car is wonderfully elegant and rakish.











Discarded wedding veils 





In further posts, you will see this faux grain work being recovered in worn areas.
To be uploaded shortly.




A few touch ups at the same time as painting other small items.




Above and Below: The starter pull rod outertube had a crack around a 
previous repair, it is not very pretty but here I have swaged a counter bore 
and soldered a new sleeve partially overlapping the old. I had to work 
quickly to avoid melting the original repair solder.







Fuel pump clean and set.




Odds and ends from projects and more

 I have just found these on an old memory stick and thought I would post them, most have a workshop connection but some are just bits and bobs!

Happy Christmas 2024 to all, and thank you for visiting the blog!

Click on photos to enlarge.


 An appropriate workshop corner for the Art In Engineering Co.                                                            The "Mae B" was the art work for my Landy nose art, the "BP" was the tail art...  these were created in the early 80s. The "Mistress Quickly" artwork was created for the sprinter, as you can see, in the mid 90s and the jacket Logo was my design for an alternative The Historic Engine Co. logo. I think I will re-introduce the latter as the Art In Engineering Co. logo. The "37" is in recognition of the Norton sidecar-cross outfit that I raced along with my late big brother, he drove and I was the sidecar monkey.

(I no longer own the Historic Engine Co, but the blog from those years still exists I am happy to say at  The Historic Engine Co. Ltd    although it has been dormant for a number of years.)



My second Swanage, Dorset workshop, very idyllic with the sea just a few yards away. The Harley-Davidson was beautiful, but very demanding for maintenance and reliability with a very over and highly tuned engine by a previous owner which simply gave reliability problems. Gone is that more gentle relaxed cruise that the original shovelhead might have been.
Layed back Jacob catching up on some comics upstairs.






This fella was in hot pursuit of the wild pigeon which had already taken cover beneath our kitchen table, he looks an angry Raptor!



Roesch Talbot, very modern thinking!




Completion of the 250 Otter BSA.


Charlotte busy making complete new Aston Martin hood frames and ash laminations.



Auster, Landy and Morris 8 (above)


Perkins P6, now a work in progress after a long break.
(above)

Another Sleeve valve Daimler


Jacob! He is 25 now and working on Steam Trains! Not sure about the chick!














A peep through our reception window :)
Ironic BMW and Frazer Nash tenuous link



Triumph Gloria, also back in progress after a break.


Jacob (sans chick) this time at a Christmas break from the workshop with mum and dad


So nice..







Aston Martin 1598 project, on to the wiring.





Not my work, but much admired when working at Hugh Murray's workshop.

And below, Henry's beautiful, beautiful Allard outside of the workshop.



Jacob's first taste of the wonderful WO Bentley

And below...so busy!


A friend's grandfathers De Dion



Sprinter in the works truck.


Jacob and Bryony chillin' with the Hillbilly Austin :)











A great day in the 80s at Rockfield Farm near Monmouth... on a winning roll all day!
500cc KTM :)



A day out with Hugh at a special Sunbeam party in Bicester, quite a while ago now.

Below, an early project, Salmson 7ac from tea chests! By the way, that isn't rust you can see, it is a blemish on the photograph


Daimler Sleeve valve test run :)




Bristol engined AC: road tests can be a real division between stress and pure pleasure.
@ Stanton Motorsport.. nice people :)





Sunbeam S motorcycle stylish engine work.





Edwardian Humber, this is extremely original, unfortunately we had to lose the patina on the block because of the necessary work, we were careful to do nothing more than gently clean the other engine parts. The car features in a Humber book, it still has the most amazing needle work interior and more importantly, has not lost the fabric colours. To see it in person is a stark contrast to our perception of Edwardian life, far brighter colours than I ever imagined.



My journey to work at Stanton Motorsport was a little under 100 miles each way, this was an exciting one :)
































A Few Small Wolesley Hornet Spl Jobs.

  Previously we made a wind deflector for the driver's Brookland screen, as with all things on this car, we tried to make it appropriate...